|
|
|
|
|
|
UN Custom-M4-RIS Deluxe Version
|
|
|
|
[24019554] |
|
|
G36C Modification Guideline for 9.6V 1500mAh
battery
This is a modification guideline for placing a
Sanyo 1500mAh 9.6V
into
Marui H&K G36C
|
1. Remove the G36C handguard and pin, cut the wire then take away
the fuse box.
2. The gun doesn't need the fuse after the gun is upgraded, it can
allow a large current pass through.
3. Reconnect the wire by soldering.
4. To make room for the larger battery, cut the area as per figure
1- 5 shown.
5. After cutting all these area, try to fit your 1500mAh 9.6V battery,
if it can not fit, you should check how many you have cutting out,
may be you need to cut more!
6. Never try to cut any area which will let you front barrel wobble.
|
Declaration :
Modify G36C is on your own risk. UN Company does not take the responsibility
of any damage upon your gun.
|
